How much do you know about the practical construction skills of bulldozers, and listen to the explanation from the accessory manufacturer. Excavator Track Shoes

How much do you know about the practical construction skills of bulldozers, and listen to the explanation from the accessory manufacturer. Excavator Track Shoes

As an important equipment for bulldozing and leveling, bulldozers are now being used more and more. Skilled operation skills and methods will help us to better play a role in the construction of bulldozers and achieve twice the power with half the effort. Bulldozers are very important in project construction. In order to ensure that there are no problems during construction, it is necessary to carefully check the clutch, accelerator, bulldozer, joystick, etc. before construction.
1. When the bulldozer goes up and down the slope, the gradient shall not be greater than 30 °; When working on the cross slope, the formwork gradient shall not be greater than 10 °. When going downhill, it is better to retreat and go downhill. It is prohibited to slide in neutral. If necessary, put down the blade to assist braking.

2. When working on steep slopes and high ridges, there shall be personnel to command, and the blade shall not exceed the edge of the slope.
3. When working in vertical trenches, the trench depth shall not exceed 2cm for large bulldozers and 1.5cm for small bulldozers. Bulldozer blades shall not push boulders or large soil blocks on the slope wall higher than the body.
4. When removing the bulldozer blade, the assistant personnel for removing the blade shall closely cooperate with the driver. When pulling through the wire rope, canvas gloves shall be worn. It is forbidden to peep near the rope hole.

5. When multiple machines are working on the same working surface, the distance between the front and rear machines shall not be less than 8m, and the distance between the left and right machines shall be more than 1.5m. When two or more bulldozers are bulldozing side by side, the distance between two bulldozer blades shall be 20~30cm. It is necessary to drive in a straight line at the same speed before bulldozing; When retreating, they should be arranged in order to avoid mutual collision.
6. When the bulldozer is used to remove the broken walls, the key points shall be improved to avoid the upside falling backward.
In fact, the principles to be mastered during bulldozer operation are: first gear bulldozer operation; Avoid unilateral load as much as possible, maintain stable bulldozer force, and minimize the distance of empty vehicles. I hope the above content can help you.