Featured
-
2021 wholesale price Tooth Bucket Excavator - DH300RC 2713-1219RC Bucket Teeth – Heli
Material: Special alloy steel Length288mm Weight:7.8kg Aperture:25mm Impact energy：30J The difference between cast bucket teeth and forged bucket teeth Although bucket teeth are small parts of excavators, they are not expensive, but they cannot be replaced. Bucket teeth generally have the difference between cast bucket teeth and forged bucket teeth. Generally, forged bucket teeth are more wear-resistant and harder, and their service life is cast. Bucket teeth are about 2 times, and the price... -
100% Original Cqc Track Roller - Komatsu excavator undercarriage part PC200 track/bottom roller made in china – Heli
roller shell material:50Mn/45# surface hardness:HRC48-58 Quench depth:>7mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>2mm Collar material:QT450-10 Weight:41kg Installation size:310mm,110mm Features and requirements The function of the track roller is to transmit the weight of the locomotive unit to the ground and roll on the track. In order to prevent derailment, the track roller should also be able to prevent the crawler from causing lateral relative movement to ... -
Best quality Fyzg Track Link Pc200 - Komatsu PC200-5 Undercarriage Parts Track Link Chains – Heli
Best Quality for komatsu PC200 excavator undercarriage parts track chain track link Warranty 2000Hours We are a professional manufacturer that is specialized in producing undercarriage spare parts for Excavator, Applicable model:for Caterpillar,for Komatsu, for Hitachi,Deawoo Hyundai, Kobelco, Sumitomo, Volvo, High Quality Warranty 2000Hours Best Quality for komatsu PC200 excavator undercarriage parts track chain track link Warranty 2000Hours excavator track link parts and so on. Crack resis... -
Manufacturer for Single Flange Track Roller Assy - CAT excavator undercarriage part 345/349 track/bottom roller made in china – Heli
roller shell material:50Mn/45# surface hardness:HRC48-58 Quench depth:>9mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>3mm Collar material:QT450-10 Weight:83.5kg Installation size:378mm,130mm What is track roller? The function of the track roller is to convey the weight of an excavator to the ground .When an excavator is run on uneven ground ,track rollers carry a tremendous impact Therefore ,the support of track rollers is huge .Moreover u5 if it is of poor qu... -
Chinese Professional Bucket Tooth Excavator - DH360/370 2713-0032RC Bucket Teeth – Heli
Material: Special alloy steel Length:314mm Weight:11.1kg Aperture:27mm Impact energy：28J Excavator bucket teeth is the important part of excavator for construction machinery,like human teeth.Bucket teeth is always fitted with the adapter using a pin. Common bucket teeth in the market are served for excavator like:Caterpillar,komatsu,Hitachi,Daewoo,ect.As bucket teeth is worked in a hard environment,so the wear-resistance is quite important,it will directly affect the working life and perform... -
Low price for Track Carrier Roller - Hitachi excavator undercarriage part carrier/up roller EX200 made in China – Heli
Roller shell material:50Mn/45# Surface hardness:HRC48-58 Quench depth:>4mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>2mm Base collar material:QT450-10/45# WEIGHT:48.5Kg WHAT IS CARRIER/UP ROLLER? The function of the supporting roller is to support the crawler belt upwards to make the crawler belt a certain degree of tension. Why choose us? Heli Machinery Manufacturing Co., Ltd. was founded in 2000 and is a highly creative technology company. The company’s m... -
Hot New Products Rear Sprocket - Komatsu excavator undercarriage part sprocket PC200 made in China – Heli
Material:ZF40Mn/ZG35Mn Surface hardness:HRC 48-58 Quench depth:root tooth>4mm top tooth>6mm Weight:39kg Installation size:20H,21T What is sprocket? provided by power generator of an excavator is conveyed to track link by running motor and sprocket . The teeth of sprocket rim should fit the track link well and should be able to drive the link steadily .Even when the link stretches due towear and uz teat of its pin and bushing ,the teeth should fit well Usually ,a sprocket rim is plac... -
100% Original Cqc Track Roller - Hitachi excavator undercarriage part EX200 track/bottom roller made in china – Heli
roller shell material:50Mn/45# surface hardness:HRC48-58 Quench depth:>7mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>2mm Collar material:QT450-10 Weight:40kg Installation size:290mm,102mm What is track roller? The supporting wheel is used to support the weight of the tractor, while rolling on the track (rail link) or the surface of the crawler track. It is also used to limit the crawler and prevent lateral slippage. When the tractor turns, the rollers force the t... -
2021 High quality Undercarriage Track Chain - Komatsu PC200-5 Undercarriage Parts Track Link Chains – Heli
Best Quality for komatsu PC200 excavator undercarriage parts track chain track link Warranty 2000Hours We are a professional manufacturer that is specialized in producing undercarriage spare parts for Excavator, Applicable model:for Caterpillar,for Komatsu, for Hitachi,Deawoo Hyundai, Kobelco, Sumitomo, Volvo, High Quality Warranty 2000Hours Best Quality for komatsu PC200 excavator undercarriage parts track chain track link Warranty 2000Hours excavator track link parts and so on. Crack resis... -
OEM Manufacturer Yellow Track Roller - CAT excavator undercarriage part 345/349 track/bottom roller made in china – Heli
roller shell material:50Mn/45# surface hardness:HRC48-58 Quench depth:>9mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>3mm Collar material:QT450-10 Weight:83.5kg Installation size:378mm,130mm What is track roller? The function of the track roller is to convey the weight of an excavator to the ground .When an excavator is run on uneven ground ,track rollers carry a tremendous impact Therefore ,the support of track rollers is huge .Moreover u5 if it is of poor qu... -
2021 China New Design Excavator Idler Link - Excavator undercarriage part front idler CAT345/349 made in china Idler – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>6mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>3.5mm Idler support material:QT450-10/ZG35 Weight:310kg What is idler? The function of an idler is to guide the track links into running smoothly and to prevent dislocation. Idlers also carry some weight and therefore increasing the track links and decreasing ground pressure.There is also an arm in the center which supports the track link and guides the two... -
High Quality for Idler In Excavator - Excavator undercarriage part front idler CAT345/349 made in china – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>4mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>2.5mm Idler support material:QT450-10/ZG35 Weight:310kg What is idler? The guide wheel is used to guide the track to revolve correctly and prevent it from running and deviating. Most excavators also play the role of supporting wheels. This can increase the contact area of the crawler to the ground and reduce the ground pressure. The guide wheel surface is ma...
