Featured
-
Chinese Professional Idler For Excavator - Excavator undercarriage part front idler Komatsu PC200-3 made in china – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>4mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>2.5mm Idler support material:QT450-10/ZG35 Weight:143kg Installation size:280mm,65mm What is idler? The function of an idler is to guide the track links into running smoothly and to prevent dislocation. Idlers also carry some weight and therefore increasing the track links and decreasing ground pressure.There is also an arm in the center which supports the ... -
Good quality Track Bottom Lower Roller - CAT excavator undercarriage part 345/349 track/bottom roller made in china – Heli
roller shell material:50Mn/45# surface hardness:HRC48-58 Quench depth:>9mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>3mm Collar material:QT450-10 Weight:83.5kg Installation size:378mm,130mm What is track roller? The function of the track roller is to convey the weight of an excavator to the ground .When an excavator is run on uneven ground ,track rollers carry a tremendous impact Therefore ,the support of track rollers is huge .Moreover u5 if it is of poor qu... -
Good Quality Bucket Tooth - Cat345rc 9w8552rc John Deere 400 Bucket Teeth – Heli
Material: Special alloy steel Length:390mm Weight:23.2kg Aperture:35mm Impact energy：32J What is bucket teeth? Bucket teeth of excavators are important parts of excavators, similar to human teeth, but also vulnerable parts. They are combined bucket teeth composed of a tooth seat and a tooth tip, and the two are connected by a pin shaft. Because the part of the bucket tooth wear and failure is the tooth tip, just replace the tooth tip. Why chose us? Our bucket teeth are all forged. The most p... -
Wholesale Idler On Excavator - Excavator undercarriage part front idler CAT345/349 made in china – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>4mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>2.5mm Idler support material:QT450-10/ZG35 Weight:310kg What is idler? The guide wheel is used to guide the track to revolve correctly and prevent it from running and deviating. Most excavators also play the role of supporting wheels. This can increase the contact area of the crawler to the ground and reduce the ground pressure. The guide wheel surface is ma... -
Factory Cheap Hot Ihi Mini Excavator Front Idler - Excavator undercarriage part front idler CAT345/349 made in china Idler – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>6mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>3.5mm Idler support material:QT450-10/ZG35 Weight:310kg What is idler? The function of an idler is to guide the track links into running smoothly and to prevent dislocation. Idlers also carry some weight and therefore increasing the track links and decreasing ground pressure.There is also an arm in the center which supports the track link and guides the two... -
China Cheap price Excavator Undercarriage Part Sprocket - Hitachi excavator undercarriage part sprocket EX200 made in China – Heli
Material:ZF40Mn/ZG35Mn Surface hardness:HRC 48-58 Quench depth:root tooth>4mm top tooth>6mm Weight:83kg Installation size:16H,23T Characteristics of sprocket The drive gear block is the undercarriage parts of the construction machinery. This is an old product with many years of technology accumulation. With unremitting exploration and research, the craftsmanship is improving day by day. Dripping water through the stone, there should be a suitable return in the end. Such products are of ... -
Good quality Undercarriage Rollers - Excavator undercarriage part front idler Komatsu PC200-3 made in china – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>4mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>2.5mm Idler support material:QT450-10/ZG35 Weight:143kg Installation size:280mm,65mm What is idler? The function of an idler is to guide the track links into running smoothly and to prevent dislocation. Idlers also carry some weight and therefore increasing the track links and decreasing ground pressure.There is also an arm in the center which supports the ... -
New Arrival China Fyzg Track Link Pc400 - Komatsu PC200-5 Undercarriage Parts Track Link Chains – Heli
Best Quality for komatsu PC200 excavator undercarriage parts track chain track link Warranty 2000Hours We are a professional manufacturer that is specialized in producing undercarriage spare parts for Excavator, Applicable model:for Caterpillar,for Komatsu, for Hitachi,Deawoo Hyundai, Kobelco, Sumitomo, Volvo, High Quality Warranty 2000Hours Best Quality for komatsu PC200 excavator undercarriage parts track chain track link Warranty 2000Hours excavator track link parts and so on. Crack resis... -
Professional China Idler Assy - Excavator undercarriage part front idler CAT345/349 made in china Idler – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>6mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>3.5mm Idler support material:QT450-10/ZG35 Weight:310kg What is idler? The function of an idler is to guide the track links into running smoothly and to prevent dislocation. Idlers also carry some weight and therefore increasing the track links and decreasing ground pressure.There is also an arm in the center which supports the track link and guides the two... -
Factory wholesale Track Lower Roller - Komatsu excavator undercarriage part PC200 track/bottom roller made in china – Heli
roller shell material:50Mn/45# surface hardness:HRC48-58 Quench depth:>7mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>2mm Collar material:QT450-10 Weight:41kg Installation size:310mm,110mm Features and requirements The function of the track roller is to transmit the weight of the locomotive unit to the ground and roll on the track. In order to prevent derailment, the track roller should also be able to prevent the crawler from causing lateral relative movement to ... -
2021 China New Design Pc200-7 Carrier Roller - Hitachi excavator undercarriage part carrier/up roller EX200 made in China – Heli
Roller shell material:50Mn/45# Surface hardness:HRC48-58 Quench depth:>4mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>2mm Base collar material:QT450-10/45# WEIGHT:48.5Kg WHAT IS CARRIER/UP ROLLER? The function of the supporting roller is to support the crawler belt upwards to make the crawler belt a certain degree of tension. Why choose us? Heli Machinery Manufacturing Co., Ltd. was founded in 2000 and is a highly creative technology company. The company’s m... -
Chinese wholesale Drive Sprocket - Hitachi excavator undercarriage part sprocket EX200 made in China – Heli
Material:ZF40Mn/ZG35Mn Surface hardness:HRC 48-58 Quench depth:root tooth>4mm top tooth>6mm Weight:83kg Installation size:16H,23T Characteristics of sprocket The drive gear block is the undercarriage parts of the construction machinery. This is an old product with many years of technology accumulation. With unremitting exploration and research, the craftsmanship is improving day by day. Dripping water through the stone, there should be a suitable return in the end. Such products are of ...
