Featured
-
Wholesale Price Hitachi Excavator Track Idler - Excavator undercarriage part front idler Komatsu PC200-3 made in china – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>4mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>2.5mm Idler support material:QT450-10/ZG35 Weight:143kg Installation size:280mm,65mm What is idler? The function of an idler is to guide the track links into running smoothly and to prevent dislocation. Idlers also carry some weight and therefore increasing the track links and decreasing ground pressure.There is also an arm in the center which supports the ... -
Manufacturer for Chain Track - Caterpillar E330 Track Link Assembly with High Quality – Heli
Raw material: Our carbon steel and special steel are supplied by the big companies all over China. -
2021 Good Quality Track Roller Single - CAT excavator undercarriage part 345/349 track/bottom roller made in china – Heli
roller shell material:50Mn/45# surface hardness:HRC48-58 Quench depth:>9mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>3mm Collar material:QT450-10 Weight:83.5kg Installation size:378mm,130mm What is track roller? The function of the track roller is to convey the weight of an excavator to the ground .When an excavator is run on uneven ground ,track rollers carry a tremendous impact Therefore ,the support of track rollers is huge .Moreover u5 if it is of poor qu... -
OEM Factory for Undercarriage Idlers - Excavator undercarriage part front idler Komatsu PC200-3 made in china – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>4mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>2.5mm Idler support material:QT450-10/ZG35 Weight:143kg Installation size:280mm,65mm What is idler? The function of an idler is to guide the track links into running smoothly and to prevent dislocation. Idlers also carry some weight and therefore increasing the track links and decreasing ground pressure.There is also an arm in the center which supports the ... -
Reasonable price Undercarriage Front Idler - Excavator undercarriage part front idler CAT345/349 made in china – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>4mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>2.5mm Idler support material:QT450-10/ZG35 Weight:310kg What is idler? The guide wheel is used to guide the track to revolve correctly and prevent it from running and deviating. Most excavators also play the role of supporting wheels. This can increase the contact area of the crawler to the ground and reduce the ground pressure. The guide wheel surface is ma... -
Wholesale Price China Chain Drive Sprocket - CAT excavator undercarriage part sprocket 345/349 made in China – Heli
Material:ZF40Mn/ZG35Mn Surface hardness:HRC 48-58 Quench depth:root tooth>5mm top tooth>8mm Weight:83kg Installation size:24H,23T What is sprocket? provided by power generator of an excavator is conveyed to track link by running motor and sprocket . The teeth of sprocket rim should fit the track link well and should be able to drive the link steadily .Even when the link stretches due towear and uz teat of its pin and bushing ,the teeth should fit well Usually ,a sprocket rim is plac... -
Good quality Undercarriage Parts Track Chain - Caterpillar E330 Track Link Assembly with High Quality – Heli
Raw material: Our carbon steel and special steel are supplied by the big companies all over China. -
Professional China Undercarriage Bucket Tooth - Cat345rc 9w8552rc John Deere 400 Bucket Teeth – Heli
Material: Special alloy steel Length:390mm Weight:23.2kg Aperture:35mm Impact energy：32J What is bucket teeth? Bucket teeth of excavators are important parts of excavators, similar to human teeth, but also vulnerable parts. They are combined bucket teeth composed of a tooth seat and a tooth tip, and the two are connected by a pin shaft. Because the part of the bucket tooth wear and failure is the tooth tip, just replace the tooth tip. Why chose us? Our bucket teeth are all forged. The most p... -
2021 Good Quality Up Roller - Excavator undercarriage part carrier/up roller CAT345/349 made in China – Heli
Roller shell material:50Mn/45# Surface hardness:HRC48-58 Quench depth:>6mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>3mm Base collar material:QT450-10/45# WEIGHT:48.5Kg What Is Carrier/up Roller ? The function of carrier rollers is to carry the track link upwards ,make certain things are linked tightly , and enable the machine to faster and more steadily Our products use special steel and produced by new process .Every procedure goes through strict inspection and... -
Super Lowest Price Track Bottom Roller - Hitachi excavator undercarriage part EX200 track/bottom roller made in china – Heli
roller shell material:50Mn/45# surface hardness:HRC48-58 Quench depth:>7mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>2mm Collar material:QT450-10 Weight:40kg Installation size:290mm,102mm What is track roller? The supporting wheel is used to support the weight of the tractor, while rolling on the track (rail link) or the surface of the crawler track. It is also used to limit the crawler and prevent lateral slippage. When the tractor turns, the rollers force the t... -
2021 China New Design Sprocket And Gear - CAT excavator undercarriage part sprocket 345/349 made in China – Heli
Material:ZF40Mn/ZG35Mn Surface hardness:HRC 48-58 Quench depth:root tooth>5mm top tooth>8mm Weight:83kg Installation size:24H,23T What is sprocket? provided by power generator of an excavator is conveyed to track link by running motor and sprocket . The teeth of sprocket rim should fit the track link well and should be able to drive the link steadily .Even when the link stretches due towear and uz teat of its pin and bushing ,the teeth should fit well Usually ,a sprocket rim is plac... -
Best quality Mini Excavator Sprocket - Komatsu excavator undercarriage part sprocket PC200 made in China – Heli
Material:ZF40Mn/ZG35Mn Surface hardness:HRC 48-58 Quench depth:root tooth>4mm top tooth>6mm Weight:39kg Installation size:20H,21T What is sprocket? provided by power generator of an excavator is conveyed to track link by running motor and sprocket . The teeth of sprocket rim should fit the track link well and should be able to drive the link steadily .Even when the link stretches due towear and uz teat of its pin and bushing ,the teeth should fit well Usually ,a sprocket rim is plac...
