Featured
-
Best quality Ec210/290 Bucket Tooth – Cat345rc 9w8552rc John Deere 400 Bucket Teeth – Heli
Material: Special alloy steel Length:390mm Weight:23.2kg Aperture:35mm Impact energy：32J What is bucket teeth? Bucket teeth of excavators are important parts of excavators, similar to human teeth, but also vulnerable parts. They are combined bucket teeth composed of a tooth seat and a tooth tip, and the two are connected by a pin shaft. Because the part of the bucket tooth wear and failure is the tooth tip, just replace the tooth tip. Why chose us? Our bucket teeth are all forged. The most p... -
High Quality for Track Roller Parts - Komatsu excavator undercarriage part PC200 track/bottom roller made in china – Heli
roller shell material:50Mn/45# surface hardness:HRC48-58 Quench depth:>7mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>2mm Collar material:QT450-10 Weight:41kg Installation size:310mm,110mm Features and requirements The function of the track roller is to transmit the weight of the locomotive unit to the ground and roll on the track. In order to prevent derailment, the track roller should also be able to prevent the crawler from causing lateral relative movement to ... -
PriceList for Dozer Idler - Excavator undercarriage part front idler Komatsu PC200-3 made in china – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>4mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>2.5mm Idler support material:QT450-10/ZG35 Weight:143kg Installation size:280mm,65mm What is idler? The function of an idler is to guide the track links into running smoothly and to prevent dislocation. Idlers also carry some weight and therefore increasing the track links and decreasing ground pressure.There is also an arm in the center which supports the ... -
High definition Track Chain Link Assy - Caterpillar E330 Track Link Assembly with High Quality – Heli
Raw material: Our carbon steel and special steel are supplied by the big companies all over China. -
Good Quality Bucket Tooth - Cat345rc 9w8552rc John Deere 400 Bucket Teeth – Heli
Material: Special alloy steel Length:390mm Weight:23.2kg Aperture:35mm Impact energy：32J What is bucket teeth? Bucket teeth of excavators are important parts of excavators, similar to human teeth, but also vulnerable parts. They are combined bucket teeth composed of a tooth seat and a tooth tip, and the two are connected by a pin shaft. Because the part of the bucket tooth wear and failure is the tooth tip, just replace the tooth tip. Why chose us? Our bucket teeth are all forged. The most p... -
100% Original Undercarriage Equipment - Excavator undercarriage part front idler CAT345/349 made in china – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>4mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>2.5mm Idler support material:QT450-10/ZG35 Weight:310kg What is idler? The guide wheel is used to guide the track to revolve correctly and prevent it from running and deviating. Most excavators also play the role of supporting wheels. This can increase the contact area of the crawler to the ground and reduce the ground pressure. The guide wheel surface is ma... -
2021 Good Quality Up Roller - Excavator undercarriage part carrier/up roller CAT345/349 made in China – Heli
Roller shell material:50Mn/45# Surface hardness:HRC48-58 Quench depth:>6mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>3mm Base collar material:QT450-10/45# WEIGHT:48.5Kg What Is Carrier/up Roller ? The function of carrier rollers is to carry the track link upwards ,make certain things are linked tightly , and enable the machine to faster and more steadily Our products use special steel and produced by new process .Every procedure goes through strict inspection and... -
Professional China Link Assy - Top quality undercarriage parts PC400-6 track link assy – Heli
What are the advantages of our EXCAVATOR track link assembly The chain material is 35MnB forging, and the bushings and pins are 40Cr. Overall quenching and tempering heat treatment, internal and external medium frequency. The internal and external precision polishing finish can reach 0.2. Achieve high precision, more wear resistance and longer service life. After the assembly is completed, the finished product is shot blasted as a whole. which has stronger adhesion and makes the overall appea... -
Hot New Products Excavator Front Idler - Excavator undercarriage part front idler CAT345/349 made in china – Heli
Idler shell material:ZG40Mn Surface hardness:HRC48-58 Quench depth:>4mm Shaft material:45# Surface hardness:HRC48-58 Quench depth:>2.5mm Idler support material:QT450-10/ZG35 Weight:310kg What is idler? The guide wheel is used to guide the track to revolve correctly and prevent it from running and deviating. Most excavators also play the role of supporting wheels. This can increase the contact area of the crawler to the ground and reduce the ground pressure. The guide wheel surface is ma... -
Fast delivery D7g Carrier Roller – Excavator undercarriage part carrier/up roller Komatsu PC200 made in China – Heli
Roller shell material:50Mn/45# Surface hardness:HRC48-58 Quench depth:>4mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>2mm Base collar material:QT450-10/45# WEIGHT:20Kg Introduction of carrier wheels Rollers crawler construction machine is an area of undercarriage parts, and its primary role is to support the weight of the excavator and a bulldozer, so proceed along the track wheels. The purpose of the sprocket wheel The supporting wheel is one of the four wheels o... -
Reasonable price Double Flange Roller - Komatsu excavator undercarriage part PC200 track/bottom roller made in china – Heli
roller shell material:50Mn/45# surface hardness:HRC48-58 Quench depth:>7mm Roller shaft material:45# Surface hardness:HRC48-58 Quench depth:>2mm Collar material:QT450-10 Weight:41kg Installation size:310mm,110mm Features and requirements The function of the track roller is to transmit the weight of the locomotive unit to the ground and roll on the track. In order to prevent derailment, the track roller should also be able to prevent the crawler from causing lateral relative movement to ... -
Good quality Undercarriage Parts Track Chain - Top quality undercarriage parts PC400-6 track link assy – Heli
What are the advantages of our EXCAVATOR track link assembly The chain material is 35MnB forging, and the bushings and pins are 40Cr. Overall quenching and tempering heat treatment, internal and external medium frequency. The internal and external precision polishing finish can reach 0.2. Achieve high precision, more wear resistance and longer service life. After the assembly is completed, the finished product is shot blasted as a whole. which has stronger adhesion and makes the overall appea...
